한국어
Embedded
 

fdisk로 부팅 가능한 sd카드 파티션을 생성

 
sd카드 장착 umount 해야함
 
$ sudo fdisk /dev/sdb
 
Welcome to fdisk (util-linux 2.31.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
 
새로운 파티션 테이블 만들기
Command (m for help): o
Created a new DOS disklabel with disk identifier 0x6e90b7a1.
 
전문가 모드
Command (m for help): x
 
Expert command (m for help): h
Number of heads (1-256, default 245): 255
 
Expert command (m for help): s
Number of sectors (1-63, default 62): 63
 
Expert command (m for help): c
Number of cylinders (1-1048576, default 966): 966
 
Expert command (m for help): r
 
첫번째 파티션 (부트파티션)
Command (m for help): n
Partition type
   p   primary (0 primary, 0 extended, 4 free)
   e   extended (container for logical partitions)
Select (default p):
 
Using default response p.
Partition number (1-4, default 1):
First sector (2048-15523839, default 2048):
Last sector, +sectors or +size{K,M,G,T,P} (2048-15523839, default 15523839): 83968
 
Created a new partition 1 of type 'Linux' and of size 40 MiB.
Partition #1 contains a vfat signature.
 
Do you want to remove the signature? [Y]es/[N]o: y
 
The signature will be removed by a write command.
 
파티션 타입
Command (m for help): t
Selected partition 1
Hex code (type L to list all codes): c
Changed type of partition 'Linux' to 'W95 FAT32 (LBA)'.
 
부트 파티션 플래그 설정
Command (m for help): a
Selected partition 1
The bootable flag on partition 1 is enabled now.
 
두번째 파티션
Command (m for help): n
Partition type
   p   primary (1 primary, 0 extended, 3 free)
   e   extended (container for logical partitions)
Select (default p):
 
Using default response p.
Partition number (2-4, default 2):
First sector (83969-15523839, default 86016):
Last sector, +sectors or +size{K,M,G,T,P} (86016-15523839, default 15523839):
 
Created a new partition 2 of type 'Linux' and of size 7.4 GiB.
 
Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
 
파일 시스템 생성
$ sudo mkfs.vfat -s1 -F 32 -n "boot" /dev/sdb1
[sudo] password for pjk:
mkfs.fat 4.1 (2017-01-24)
mkfs.fat: warning - lowercase labels might not work properly with DOS or Windows
 
$ sudo mkfs.ext4 /dev/sdb2
 
 
$ sudo fdisk -l /dev/sdb
Disk /dev/sdb: 7.4 GiB, 7948206080 bytes, 15523840 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x6e90b7a1
 
Device     Boot Start      End  Sectors  Size Id Type
/dev/sdb1  *     2048    83968    81921   40M  c W95 FAT32 (LBA)
/dev/sdb2       86016 15523839 15437824  7.4G 83 Linux

 

번호 제목 글쓴이 날짜 조회 수
32 STM32 & LibOpenCM3, printf함수사용 file makersweb 2019.08.08 3126
31 STM32(Cortex-M3) 개발 - Firmware Flashing file makersweb 2019.07.23 3165
30 임베디드 시스템에서 베어메탈(Bare metal) 이란? makersweb 2019.12.11 3339
29 ESP32 블루투스 스피커(A2DP Sink) file makersweb 2019.10.29 3505
28 임베디드 시스템 개발 환경 선택 makersweb 2014.03.05 3528
27 STM32(Cortex-M3) 개발환경구축 with Eclipse file makersweb 2018.11.08 3586
26 부트로더의 start.S 분석 file makersweb 2014.03.23 3613
25 yocto의 몇가지 중요한 용어 및 개념 makersweb 2019.06.21 3980
24 플랫폼 디바이스 및 디바이스 트리 makersweb 2021.03.20 4004
23 STM32(Cortex-M3) 개발환경구축 with PlatformIO file makersweb 2019.07.26 4016
22 JFlashARM으로 MCU에 bin(바이너리)다운로드 file makersweb 2015.06.07 4295
21 시리얼 인터페이스 커넥터를 위한 핀아웃 file pjk 2014.10.10 4798
20 AVR(AT90USB162)을 USB to Serial 로 이용하기 file makersweb 2015.02.14 4821
19 블루투스(Bluetooth) 기초 file makersweb 2019.08.02 4924
18 printk() makersweb 2014.02.27 5153
17 STM32와 CAN(Controller Area Network) Loop Back file makersweb 2017.01.23 5411
16 디바이스 트리(Device Tree, DT) makersweb 2020.01.12 5592
15 HelloWorld 커널 모듈과 yocto 레시피 추가 방법 file makersweb 2019.12.09 5642
14 실시간 운영 체제 또는 RTOS(Real Time Operating System) pjk 2014.12.02 5847
13 폴링(Polling), 인터럽트(Interrupt), DMA(Direct Memory Access) file pjk 2014.10.24 6012