한국어
Embedded
 

fdisk로 부팅 가능한 sd카드 파티션을 생성

 
sd카드 장착 umount 해야함
 
$ sudo fdisk /dev/sdb
 
Welcome to fdisk (util-linux 2.31.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
 
새로운 파티션 테이블 만들기
Command (m for help): o
Created a new DOS disklabel with disk identifier 0x6e90b7a1.
 
전문가 모드
Command (m for help): x
 
Expert command (m for help): h
Number of heads (1-256, default 245): 255
 
Expert command (m for help): s
Number of sectors (1-63, default 62): 63
 
Expert command (m for help): c
Number of cylinders (1-1048576, default 966): 966
 
Expert command (m for help): r
 
첫번째 파티션 (부트파티션)
Command (m for help): n
Partition type
   p   primary (0 primary, 0 extended, 4 free)
   e   extended (container for logical partitions)
Select (default p):
 
Using default response p.
Partition number (1-4, default 1):
First sector (2048-15523839, default 2048):
Last sector, +sectors or +size{K,M,G,T,P} (2048-15523839, default 15523839): 83968
 
Created a new partition 1 of type 'Linux' and of size 40 MiB.
Partition #1 contains a vfat signature.
 
Do you want to remove the signature? [Y]es/[N]o: y
 
The signature will be removed by a write command.
 
파티션 타입
Command (m for help): t
Selected partition 1
Hex code (type L to list all codes): c
Changed type of partition 'Linux' to 'W95 FAT32 (LBA)'.
 
부트 파티션 플래그 설정
Command (m for help): a
Selected partition 1
The bootable flag on partition 1 is enabled now.
 
두번째 파티션
Command (m for help): n
Partition type
   p   primary (1 primary, 0 extended, 3 free)
   e   extended (container for logical partitions)
Select (default p):
 
Using default response p.
Partition number (2-4, default 2):
First sector (83969-15523839, default 86016):
Last sector, +sectors or +size{K,M,G,T,P} (86016-15523839, default 15523839):
 
Created a new partition 2 of type 'Linux' and of size 7.4 GiB.
 
Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
 
파일 시스템 생성
$ sudo mkfs.vfat -s1 -F 32 -n "boot" /dev/sdb1
[sudo] password for pjk:
mkfs.fat 4.1 (2017-01-24)
mkfs.fat: warning - lowercase labels might not work properly with DOS or Windows
 
$ sudo mkfs.ext4 /dev/sdb2
 
 
$ sudo fdisk -l /dev/sdb
Disk /dev/sdb: 7.4 GiB, 7948206080 bytes, 15523840 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x6e90b7a1
 
Device     Boot Start      End  Sectors  Size Id Type
/dev/sdb1  *     2048    83968    81921   40M  c W95 FAT32 (LBA)
/dev/sdb2       86016 15523839 15437824  7.4G 83 Linux

 

번호 제목 글쓴이 날짜 조회 수
32 시리얼 인터페이스 커넥터를 위한 핀아웃 file pjk 2014.10.10 4798
31 JFlashARM으로 MCU에 bin(바이너리)다운로드 file makersweb 2015.06.07 4287
30 STM32(Cortex-M3) 개발환경구축 with PlatformIO file makersweb 2019.07.26 4008
29 플랫폼 디바이스 및 디바이스 트리 makersweb 2021.03.20 3962
28 yocto의 몇가지 중요한 용어 및 개념 makersweb 2019.06.21 3955
27 부트로더의 start.S 분석 file makersweb 2014.03.23 3609
26 STM32(Cortex-M3) 개발환경구축 with Eclipse file makersweb 2018.11.08 3586
25 임베디드 시스템 개발 환경 선택 makersweb 2014.03.05 3526
24 ESP32 블루투스 스피커(A2DP Sink) file makersweb 2019.10.29 3498
23 임베디드 시스템에서 베어메탈(Bare metal) 이란? makersweb 2019.12.11 3319
22 STM32(Cortex-M3) 개발 - Firmware Flashing file makersweb 2019.07.23 3160
21 STM32 & LibOpenCM3, printf함수사용 file makersweb 2019.08.08 3124
20 욕토 프로젝트를 이용한 Qt SDK 빌드 for 라즈베리파이3 file makersweb 2019.03.19 3061
19 Yocto를 이용한 wandboard BSP 및 Qt5 SDK 빌드 file makersweb 2019.09.29 2618
18 STM32(Cortex-M3) LED Blink with PlatformIO file makersweb 2019.08.05 2039
17 Raspberry Pi 의 프레임버퍼(Framebuffer)구성 makersweb 2020.05.15 1813
16 POSIX를 지원하는 오픈소스 RTOS, RTEMS file makersweb 2020.04.15 1715
» 라즈베리파이 부팅 가능한 sd카드 파티션 생성 makersweb 2020.04.15 1704
14 라즈베리파이2에서 RTOS기반 GPIO제어(LED) file makersweb 2020.04.21 1630
13 임베디드 개발자를 위한 Hex,Bin,Dec 변환기 유틸 file makersweb 2023.02.27 1118