한국어
Embedded
 

fdisk로 부팅 가능한 sd카드 파티션을 생성

 
sd카드 장착 umount 해야함
 
$ sudo fdisk /dev/sdb
 
Welcome to fdisk (util-linux 2.31.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
 
새로운 파티션 테이블 만들기
Command (m for help): o
Created a new DOS disklabel with disk identifier 0x6e90b7a1.
 
전문가 모드
Command (m for help): x
 
Expert command (m for help): h
Number of heads (1-256, default 245): 255
 
Expert command (m for help): s
Number of sectors (1-63, default 62): 63
 
Expert command (m for help): c
Number of cylinders (1-1048576, default 966): 966
 
Expert command (m for help): r
 
첫번째 파티션 (부트파티션)
Command (m for help): n
Partition type
   p   primary (0 primary, 0 extended, 4 free)
   e   extended (container for logical partitions)
Select (default p):
 
Using default response p.
Partition number (1-4, default 1):
First sector (2048-15523839, default 2048):
Last sector, +sectors or +size{K,M,G,T,P} (2048-15523839, default 15523839): 83968
 
Created a new partition 1 of type 'Linux' and of size 40 MiB.
Partition #1 contains a vfat signature.
 
Do you want to remove the signature? [Y]es/[N]o: y
 
The signature will be removed by a write command.
 
파티션 타입
Command (m for help): t
Selected partition 1
Hex code (type L to list all codes): c
Changed type of partition 'Linux' to 'W95 FAT32 (LBA)'.
 
부트 파티션 플래그 설정
Command (m for help): a
Selected partition 1
The bootable flag on partition 1 is enabled now.
 
두번째 파티션
Command (m for help): n
Partition type
   p   primary (1 primary, 0 extended, 3 free)
   e   extended (container for logical partitions)
Select (default p):
 
Using default response p.
Partition number (2-4, default 2):
First sector (83969-15523839, default 86016):
Last sector, +sectors or +size{K,M,G,T,P} (86016-15523839, default 15523839):
 
Created a new partition 2 of type 'Linux' and of size 7.4 GiB.
 
Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
 
파일 시스템 생성
$ sudo mkfs.vfat -s1 -F 32 -n "boot" /dev/sdb1
[sudo] password for pjk:
mkfs.fat 4.1 (2017-01-24)
mkfs.fat: warning - lowercase labels might not work properly with DOS or Windows
 
$ sudo mkfs.ext4 /dev/sdb2
 
 
$ sudo fdisk -l /dev/sdb
Disk /dev/sdb: 7.4 GiB, 7948206080 bytes, 15523840 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x6e90b7a1
 
Device     Boot Start      End  Sectors  Size Id Type
/dev/sdb1  *     2048    83968    81921   40M  c W95 FAT32 (LBA)
/dev/sdb2       86016 15523839 15437824  7.4G 83 Linux

 

번호 제목 글쓴이 날짜 조회 수
52 GNU C 레퍼런스 메뉴얼 - 부록 D secret makersweb 2014.02.28 5
51 Rockchip VOP makersweb 2024.04.22 57
50 Raspberry Pi 와 ATtiny85 간 I²C 통신 file makersweb 2023.03.18 432
49 ATtiny85 개발보드(HW-260) file makersweb 2023.01.02 446
48 Raspberry Pi에서 I²C 그리고 Bit-bang (비트뱅) makersweb 2023.08.27 472
47 로직분석기와 함께 PulseView 를 사용해서 CAN 신호 캡쳐 file makersweb 2023.03.16 611
46 mainline 커널 및 etnaviv 를 사용하는 Wandboard(Freescale i.MX6Q)에서 eglfs를 사용 makersweb 2019.10.17 935
45 Yocto 프로젝트 3.4 릴리스(honister) 이상 버전으로 마이그레이션 시 참고 사항 makersweb 2023.03.21 938
44 임베디드 비대칭 멀티 프로세싱(asymmetric multiprocessing) 시스템 file makersweb 2019.12.31 939
43 Android 기기를 사용하여 Raspberry Pi SD 카드 작성 방법 file makersweb 2020.08.01 984
42 RISC-V : 자유롭고 개방 된 RISC 명령어 세트 아키텍처 [2] file makersweb 2020.01.01 1010
41 libopencm3 활용, Cortex-M 펌웨어 개발 makersweb 2019.07.14 1080
40 임베디드 개발자를 위한 Hex,Bin,Dec 변환기 유틸 file makersweb 2023.02.27 1117
39 라즈베리파이2에서 RTOS기반 GPIO제어(LED) file makersweb 2020.04.21 1629
» 라즈베리파이 부팅 가능한 sd카드 파티션 생성 makersweb 2020.04.15 1703
37 POSIX를 지원하는 오픈소스 RTOS, RTEMS file makersweb 2020.04.15 1713
36 Raspberry Pi 의 프레임버퍼(Framebuffer)구성 makersweb 2020.05.15 1812
35 STM32(Cortex-M3) LED Blink with PlatformIO file makersweb 2019.08.05 2039
34 Yocto를 이용한 wandboard BSP 및 Qt5 SDK 빌드 file makersweb 2019.09.29 2618
33 욕토 프로젝트를 이용한 Qt SDK 빌드 for 라즈베리파이3 file makersweb 2019.03.19 3061