한국어
Qt
 

Qt MQTT 를 사용해보기 위해 우분투 데스크탑에 빌드환경을 구축하고 예제를 실행해본다. Qt MQTT는 커머셜 라이센스 및 GPL 로 사용할 수 있으며 커머셜 라이센스를 보유하고 있다면 MaintenanceTool 을 통해 간단하게 설치할 수 있다.

여기서는 오픈소스 라이센스하에서 사용할 것이므로 직접 소스코드를 빌드하여 빌드환경을 구축한다. 기본적으로 Qt가 설치되어 있어야하며 여기서는 이 과정 (Qt 설치)을 생략한다.
 

Qt MQTT 구축

다음은 git저장소를 클론하고 빌드하는 과정을 보여준다.
$ git clone https://code.qt.io/qt/qtmqtt.git
$ cd qtmqtt
$ git checkout 5.12.9
$ ~/Qt/5.12.5/gcc_64/bin/qmake
$ make
$ make install
 
이제 프로젝트 파일(.pro)에 다음 줄을 추가하면 mqtt 모듈을 사용할 수 있다.
QT    += mqtt
 
클래스를 사용하기 위해 관련 (클라이언트)헤더를 포함한다.
#include <QtMqtt/QMqttClient>
#include <QtMqtt/QMqttMessage>
#include <QtMqtt/QMqttSubscription>
 
클라이언트 객체 생성과 호스트 연결
QMqttClient *client = new QMqttClient();
client->setHostname("Host Name");
client->setPort(1883);
 
클라이언트 객체는 다음과 같은 유용한 시그널을 제공한다.
QMqttClient::stateChanged
QMqttClient::disconnected
QMqttClient::messageReceived
QMqttClient::pingResponseReceived
 
호스트에 연결
if(client->state() == QMqttClient::Disconnected)
    client->connectToHost();
 
토픽 구독
int qos = 0;
QMqttSubscription *subscription = client->subscribe(QMqttTopicFilter("topic"), qos);

 

 

구독이 성공하면 다음 시그널에 연결하여 메세지를 수신할 수 있다.

QMqttSubscription::messageReceived
QMqttSubscription::stateChanged
QMqttSubscription::qosChanged
 
구독을 취소하려면 다음과 같이 할 수 있다.
subscription->unsubscribe();
 
토픽의 메세지를 게시하면 해당 토픽을 구독하는 클라이언트에게 메세지를 전달한다.
client->publish(QMqttTopicName("topic"), "message");

 

pub/sub 예제

이제 간단한 pus/sub예제를 실행 해본다.
브로커는 라즈베리파이4에 mosquitto 를 설치하여 구축한다. 다음의 명령줄로 간단하게 설치할 수 있다.
pi@raspberrypi:~ $ sudo apt install mosquitto
 
다음은 우분투 데스크탑에서 실행되는 간단한 클라이언트 예제를 보여준다.
#include <QCoreApplication>
#include <QtMqtt/QMqttClient>
#include <QtMqtt/QMqttMessage>
#include <QtMqtt/QMqttSubscription>

#include <QDebug>

void subscribe(QMqttClient *client){
    QString topic("sensors/house/temperature");

    int qos = 0;
    QMqttSubscription *subscription = client->subscribe(QMqttTopicFilter(topic), qos);

    QObject::connect(subscription, &QMqttSubscription::messageReceived, [subscription](const QMqttMessage &msg){
        qDebug() << "topic: " << msg.topic().name() << ", temperature: " << msg.payload().toInt() << "°C";
        subscription->unsubscribe();


        qApp->exit();
    });

    // publish message
    client->publish(topic, "15");
}


int main(int argc, char *argv[])
{
    QCoreApplication a(argc, argv);

    QMqttClient client;
    client.setHostname("10.10.10.102"); // Raspberry pi4 IP Address.
    client.setPort(1883);

    QObject::connect(&client, &QMqttClient::stateChanged, [&client](){
        if(client.state() == QMqttClient::Connected){
            qDebug() << "Client Connected.";
            subscribe(&client);
        }
    });

    if(client.state() == QMqttClient::Disconnected){
        // connect to broker
        client.connectToHost();
    }

    return a.exec();
}
실행결과:
qtmqtt.png
번호 제목 글쓴이 날짜 조회 수
공지 Qt프로그래밍(QtQuick) Beginner를 위한 글 읽는 순서 운영자 2019.01.05 85343
23 Android 애플리케이션 서명 구성 file makersweb 2023.12.17 375
22 Qt Safe Renderer 개요 file makersweb 2022.09.08 469
21 Qt로 작성된 iOS 앱에서 시리얼 통신 file makersweb 2022.04.30 807
20 Qt Bluetooth Low Energy 개요 makersweb 2022.02.13 650
19 Qt Android 앱에 AdMob 배너달기 file makersweb 2021.12.04 385
» Qt MQTT의 pus/sub 튜토리얼 file makersweb 2021.02.06 1602
17 Qt MQTT 에 대해서 file makersweb 2020.06.02 946
16 Qt로 작성된 안드로이드 APP에 Splash Screen을 추가 file makersweb 2020.03.10 870
15 라즈베리파이4에 대한 Qt 5.14.1 크로스컴파일 [1] file makersweb 2020.02.12 4437
14 Qt for MCU 1.0 릴리즈 makersweb 2019.12.10 747
13 라즈베리파이3에서 Boot to Qt 실행해보기 makersweb 2019.11.13 1650
12 Qt for Embedded Linux 화면출력 makersweb 2019.10.17 1586
11 MCU용 Qt에 대해서 makersweb 2019.08.22 1877
10 가상키보드(Qt Virtual Keyboard)를 사용하는 방법 [32] file makersweb 2019.05.03 219959
9 Qt5기반 독립 프로세스(out-of-process)로 동작하는 가상키보드(virtual keyboard) file makersweb 2019.02.24 2605
8 Qt Bluetooth를 이용한 시리얼(Serial) 통신 file makersweb 2019.02.17 3496
7 안드로이드 가상장치 사용 file makersweb 2019.01.13 1059
6 QtWayland와 ivi-compositor file makersweb 2018.12.27 2395
5 싱글터치 스크린 및 임베디드 리눅스 기반에서 Qt 터치입력 makersweb 2018.12.24 1385
4 안드로이드 Qt 프로그래밍 file makersweb 2018.11.30 8734